Notes on upgrading to EDIUS 11
- Specification
Notes on upgrading to EDIUS 11
FAQ ID:000025760 | Date:2023/10/11
Nine things to consider before you upgrade to EDIUS 11:
1. System Requirements
– EDIUS 11 only running in Windows 10 version 21H2 or later. It no longer supports earlier version of Windows 10, 8.1, 8 and 7 (already EOS)
-EDIUS 11 requires a processor that supports AVX2 instruction set (5th Gen or newer generation of Intel Processor support it)
-Grass Valley recommend obtaining the latest Windows Updates before running the EDIUS installer.
2. Simultaneous installation of different versions
EDIUS 11 does not allow simultaneous installation of different EDIUS versions. If another version is being installed, uninstall it before running the EDIUS 11 installer – details here
3. Supported video editing hardware
Grass Valley Hardware
-EDIUS 11 only supports Storm Pro and Storm 3G
-In Storm 3G, RS-422 remote control does not work on base-band capture and playout. It only works on VTR Emulation (separate option license required)
Third Party Hardware
AJA and Black Magic Design video hardware are supported. For details, click here
4. Third-party Plugin Software
EDIUS 11 does not support the third-party plug-in software designed for previous versions of EDIUS.
5. Project file compatibility
– EDIUS 11 is forwards-compatible with project files created with ‘-1’ earlier version of EDIUS. However, third-party filter effects or titles may not be imported. Dummy effects will be applied in these cases.
– Earlier version of EDIUS does not support backwards-compatible with project files created with EDIUS 11.
6. Upgrading from earlier version of EDIUS
– If purchased license is Upgrade or Jump Upgrade, you will be required to activate both EDIUS 11 and earlier version. Do NOT deactivate earlier version’s license after completing license activation. GV License Manager validates both ‘Upgrade’ or ‘Jump Upgrade’ and earlier version’s licenses. If earlier version’s license would be deactivated, “Invalid license” will appear – for more details, click here
– Remaining copy of earlier version cannot be used in another PC.
– Both upgrade edition and earlier version of EDIUS must be linked to same eID. You are not allowed to link each EDIUS license to different eID. If you no longer to use current eID (you would like to replace to another eID), contact to GV technical support along with below information:
– eID currently used
– Replacement eID
– EDIUS serial numbers – both older version and Upgrade (Jump Upgrade)
7. Use EDIUS in offline mode
EDIUS Pro and Workgroup (excl. OEM license of both editions) also require a link to the eID when first time starting of EDIUS. For linking to eID, connect the client to internet. Once linking to eID successfully, You are allowed offline use for up to 30 days.
You are required connecting EDIUS client to internet within every 30 days. For details, click here
EDIUS Broadcast edition and OEM version of Pro / Workgroup allows permanent use in offline mode (you are not required periodical internet connection). Linking to eID is not available on these products – eID log in screen will not appear. |
8. Bru-lay disc / DVD authoring
Separate option license is required to burn Blu-ray disc / DVD.
9. Obsoleted features
Below features are no longer available in EDIUS 11 – details here
– Stereoscopic editing mode
– Multiple destination exporter
– Mync Storyboard
Related Content
MENU
- About EDIUS
- License
- Way to retrieve EDIUS serial number
- An error occurs while activating VisTitle license
- Way to gather license information file
- 0x800CE1A error appears when validating the license
- Replace EDIUS license from Trial to Product license
- Activate EDIUS / Mync license manually
- Way to identify the license being activated
- Deactivate license by manipulating GV License Manager
- Activate / deactivate license in off-line mode
- An error occurs while license activation / deactivation
- Specification
- Different versions of EDIUS on the same PC
- EDIUS 11: Notes on performance improvement of project loading
- GPU hardware acceleration for preview and timeline export
- EDIUS X supported file formats
- Functional differences between EDIUS X Pro and Workgroup
- EDIUS X proxy clip improvement
- Notes on upgrading to EDIUS X
- EDIUS project file compatibility
- Windows 11 compatible information
- EDIUS X system requirements
- Installation
- .NET Framework installation fails
- Steps to upgrade VisTitle Express build
- Resolved - EDIUS installation fails on February 29
- Way to reinstall EDIUS to resolve the issue of not running EH services
- EDIUS / Mync: Way to identify GV License Manager build number
- Windows Defender SmartScreen prevents running EDIUS installer
- Simultaneous use of multiple EDIUS in same PC
- EDIUS asks specifying file location while uninstalling or upgrading
- Steps to install EDIUS
- Replace EDIUS license to new PC
- Starting-up
- EDIUS does not start
- EDIUS fails to start with AMD GPU
- EDIUS fails to start by no progress of 'initializing asset repository'
- Error starting EDIUS, Failed to communicate with the service
- Configure EDIUS on first time starting
- Start editing video
- Starting fails / Not found EH service error appears
- EDIUS takes a long time to start up
- ASP.NET Core Runtime 6.0.16 blocks correct working of EH services
- EDIUS license validation fails with #2F19 error
- View
- Project Settings
- Clip
- Long duration clip placed onto the timeline
- "Codec type not supported" error appears when loading Blackmagic RAW clip
- Cannot load .CR3 clip in EDIUS
- EDIUS / Mync is unable to load HEIC file
- Can I edit a clip shot by 360 degree camera ?
- EDIUS becomes unstable with 11th Gen Intel Processor and NVIDIA GPU
- EDIUS may freeze while decoding H.264 or 265 clip on 12th Gen Intel Core processor
- EDIUS rejects loading a file
- EDIUS shows a footage with incorrect alpha channel
- Use GPU acceleration for decode / encode
- Import / Capture / Data migration
- How to use the Input Preset menu
- Captured clip is split into multiple clips
- Input timecode does not appear while video capture
- Troubleshooting of transferred clip to be offline
- EDL import fails in EDIUS
- EDIUS / Mync is unable to load HEIF file
- EDIUS cannot import a DVD
- Create capture device preset
- Generic troubleshooting for issue of capture via video I/O hardware
- Way to migrate older Mync library to Mync 11
- Operation
- Clips are off-line in EDIUS project when loading project on another client
- Video scope does not work in EDIUS 9
- Import / export does not work from / to P2 card
- About auto recovery of corrupted project Bin
- EDIUS 11: Troubles when importing MP4 or MOV files or Proxy Originated Editing
- Proxy Stuttering/jerking on EDIUS XS
- Asset Store database migration on updating EDIUS 11
- EDIUS 11: Not working the Bin with STATUS_STACK_BUFFER_OVERRUN error
- "Synchronization of project and database" appears while loading a project
- EDIUS 11: Audio editing response is very slow while modifying rubber band
- Effect
- Cannot apply a clip transition
- Cannot use GPUfx transitions
- EDIUS 11: Way to install VisTitle Express
- GPU transition tree doesn't appear in Effect Palette
- EDIUS X: Compatible third party effect plug-in
- Third party plug-in compatibility by EDIUS versions
- Third party effect plug-in doesn't appear in the effect tree
- Cannot apply a clip transition or audio cross fade
- EDIUS 9: Compatible third party effect plug-in
- EDIUS 8: Compatible third party effect plug-in
- Title
- Quick Titler cannot import a text file
- Title text is fuzzy in Quick Titler
- QuickTitler works slowly when creating a title clip in *.etl2 format
- Titler Pro clip becomes offline in EDIUS X timeline
- EDIUS QuickTitler window is invisible
- Typed first Chinese character doesn't appear in QuickTitler
- QuickTitler text unexpectedly changes / disapeears when loading a title in another PC
- Switch QuickTitler default format
- Audio
- Export
- EDIUS unable to print to tape
- An error appears when printing to H.265 clip on EDIUS 9
- How to export XDCAM MXF single clip in EDIUS 9?
- Timeline export fails if project has thousands of clips
- "Failed to export following tracks..." error appears while exporting EDIUS timeline to an AAF
- Alpha channel is lost in a clip printed by EDIUS
- MP3 audio exporter doesn't appear
- Different size title text appears in exported file
- File export dialog doesn't appear
- Invalid file / folder name are set for file export
- Hardware
- Third party video hardware tested with EDIUS X
- Third party video hardware tested with EDIUS 9
- Color belt appears on video monitor connected to AJA hardware
- Color bar appears on connected video monitor after signing onto the Windows
- Use video hardware while inactive of EDIUS
- How to setup third party video hardware?
- Warning LED is flashing in Storm 3G Elite I/O box
- Not light on Power LED in Storm 3G Elite I/O box
- PCIe Linked LED is flashing in Storm 3G Elite I/O box
- Storm 3G Elite Voice Over doesn't work
- Others
- User Settings
- eID (EDIUS ID)
- Environment Settings
- Way to force dispatch Intel integrated graphics to EDIUS application
- GV Render Engine ignores proxy server settings for the LAN
- EDIUS fails to import from / export to ftp servers
- Background job cancelled once power mode changed
- Modify EDIUS Hub services port number
- Way to specify the Chorus / EDIUS Hub Server without mDNS / DNS-SD
- Which resampling method should I select?
- Optimize workstation configuration
- Mync does not retain FTP Uploader settings
- Display adapter does not appear in system settings
- Editing Configuration
- Disc Burner
- EDIUS Pro 9
- Video scope does not work in EDIUS 9
- An error appears when printing to H.265 clip on EDIUS 9
- "Codec type not supported" error appears when loading Blackmagic RAW clip
- Color belt appears on video monitor connected to AJA hardware
- Color bar appears on connected video monitor after signing onto the Windows
- Cannot load .CR3 clip in EDIUS
- MP3 audio exporter doesn't appear
- Automatically find out floating license server doesn't work
- EDIUS Workgroup 9
- Video scope does not work in EDIUS 9
- An error appears when printing to H.265 clip on EDIUS 9
- How to export XDCAM MXF single clip in EDIUS 9?
- "Codec type not supported" error appears when loading Blackmagic RAW clip
- Color belt appears on video monitor connected to AJA hardware
- Color bar appears on connected video monitor after signing onto the Windows
- Cannot load .CR3 clip in EDIUS
- MP3 audio exporter doesn't appear
- Automatically find out floating license server doesn't work
- EDIUS X Pro
- EDIUS proxy clip compatibility
- EDIUS X proxy clip improvement
- Titler Pro clip becomes offline in EDIUS X timeline
- "Codec type not supported" error appears when loading Blackmagic RAW clip
- Color belt appears on video monitor connected to AJA hardware
- Color bar appears on connected video monitor after signing onto the Windows
- Cannot load .CR3 clip in EDIUS
- MP3 audio exporter doesn't appear
- Batch file conversion menu is inactive in the Bin
- Windows Media Video exporter disappears in Bin batch file conversion
- EDIUS X Workgroup
- EDIUS proxy clip compatibility
- EDIUS X proxy clip improvement
- Titler Pro clip becomes offline in EDIUS X timeline
- "Codec type not supported" error appears when loading Blackmagic RAW clip
- Color belt appears on video monitor connected to AJA hardware
- Color bar appears on connected video monitor after signing onto the Windows
- Cannot load .CR3 clip in EDIUS
- MP3 audio exporter doesn't appear
- Batch file conversion menu is inactive in the Bin
- Windows Media Video exporter disappears in Bin batch file conversion
- FAQ Archives
- HDV/DV tape I/O does not work
- Preparation for HDV/DV tape I/O
- Unable to import / export still images
- Help cannot be opened
- Help menu does not appear
- About After Effects Plug-in Bridge support
- "Not implemented" error appears while exporting to XAVC S
- EDIUS 8 / 7: How to setup 3rd party hardware?
- EDIUS 8 Third party hardware support
- EDIUS 7 3rd party hardware support
- Rendering